1.A connecting link of an O-ring Chain for common application is pre-coated with grease at the pins. Ahead of connection, verify the grease over the surfaces of pins, and should the volume of grease is tiny, apply grease with bare hands. (If gloves are utilised, the grease might be absorbed by the gloves.)
Instance: When the connecting website link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted with the roots with the pins. When the O-rings come loose on account of vibration in the course of transport, refit the O-rings in to the roots with the pins.
In this instance, make sure to return the grease collected on the roots with the pins to the central surfaces of the pins, additional at portion A than at portions B proven inside the above illustration. (Portions A is worn as a consequence of sliding with the bushings.)
2.The chain is usually most effortlessly linked within the teeth of the sprocket. Engage the links at the two ends of your chain together with the sprocket teeth and fit connecting pins. If your sprocket may be moved, the chain may also be connected around the loosened side.
3. Connecting process
one.Confirm that O-rings are attached towards the roots in the pins.
two.If your quantity of grease applied over the connecting pins is small, coat the pins with grease in the central portions.
three.Insert the connecting pins in to the bushings of the inner back links at the two ends.
four.Confirm the grease is utilized to your whole encounter with the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and when pressing the connecting plate, install the spring clip. Verify regardless of whether the head (the end without a split) of your spring clip is turned within the feeding direction of your chain. (See the following illustration.)
6.Be sure to verify the spring clip is securely fitted from the clip grooves from the connecting pins.
This completes jointing in the connecting website link. Note that grease around the surfaces of connecting pins and O-rings might be removed for the duration of installation function. In this case, re-grease applying the grease over the surface from the base chain or the grease while in the polyethylene bag by which the connecting hyperlink was contained.