TF Form Flanges
Model TF flanges are made from the identical high-strength cast iron as the S flanges, but are made to accommodate the international common Taper Lock bushing for simple set up and removal
TF Variety flanges let for mounting the bushing about the front (hub) side with the flange
TF flanges are available in sizes 6 by way of sixteen and will be utilized with any style of sleeve as pictured on webpage SF-5
TR Form Flanges
TR flanges are comparable for the TF type, but allow for that Taper Lock Bushing to become mounted and removed from
the reverse or serration side in the flange
The limited torque ratings in the Taper Lock Bushings allow TR flanges to only be utilized with EPDM or Neoprene sleeves
Distinct bushing sizes are applied, so they have various highest bores than the TF flanges
Sizes 6 via sixteen are available
Taper-Lock Bushings
The field typical taper lock bushing is actually a split style enabling a compression fit from the flange for the shaft devoid of set screws
The straightforward design and style makes the installation and elimination quick while the 8° taper grips tight and supplies excellent concentricity
A Lowered level of inventory might be accomplished as a result of the many other energy transmission elements that use Taper Lock Bushings which include: sheaves, sprockets, and pulleys
isn’t going to give the Taper-Lock Bushings themselves as they’re broadly available from other manufacturers