Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is built to operate material managing tools. The reducing movement is achived through the solenoid valve with the reducing pace controlled by an adjustable needle valve. The left and appropriate functions are equipped using a dual pilot operated test valve and cross-over relief valves.
Remark: Please check with our product sales engineer to the distinctive pump displacement, motor electrical power or tank capacity.
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean each of the hydraulic parts concerned before installation of the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities.N46 hydraulic oil is encouraged.
4. This energy unit needs to be mounted horizontal.
5. Check the oil degree during the tank just after the 1st start with the energy unit.
six. Oil altering is needed soon after the original a hundred operation hrs, afterwards the moment each 3000 hrs.