Our disc packs are produced using substantial grade stainless steel
(AISI-301), ensuring high strength, higher endurance to fatigue, and resistance to most environmental problems.
Disc couplings use unitized disc packs with both 6 or 8 bolt types. The 8 bolt style and design can transmit greater torque compared to the six bolt style, even so, it’s not ready to accommodate as substantially angular misalignment.
Couplings is usually fitted with overload bushings to safeguard the disc pack all through momentary torsional overloads.
Couplings are presented inside a selection of configurations to fit most applications. Also, ?¡¥s engineering department can customize a coupling to meet quite a few exclusive prerequisites this kind of as close coupled, drop-out centers, electrically insulated, vertical mounting, and security couplings. A notable style offered by is definitely the lowered moment (DI Style) coupling that meets the anti-flail gadget requirements mandated in API-610 whilst giving a very low bodyweight and brief center of gravity to bearing distance.
The style and design and manufacture of disc couplings is integrated into a licensed High-quality Program in accordance to ISO-9001 to fulfill the large good quality requirements of prospects.
Pros with the Disc Coupling
Eliminates the need for lubrication and coupling maintenance
Coupling could be inspected without the need of disassembly
Condition of disc packs could be inspected using a strobe light although the machine is operating
Note: It can be not proposed that couplings be operated without having coupling guards.
Easy to assess gear misalignment
Torsionally rigid with no any backlash
No sporting elements
\Resistance to harsh environments
Long lifestyle when appropriately sized and aligned
High electrical power density (greater torque for any offered outside diameter)
Supports the API-610 Conventional up to 3,800 RPM
Unitized disc packs ensure repeatability essential for meeting the stability and piloting necessities as mandated by API-610
Out there with Overload Bushings to guard the coupling from momentary torque overloads
Prevents the disc pack from staying plastically deformed
Allows for shorter BSE (shaft separation) mainly because bolts can be turned to face inward
Special orientation of bolts enables the bolts to be tightened utilizing a torque wrench in place of nuts (Standard is always to tighten nuts with torque wrench)