Equiped that has a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves as well as a tank, this energy unit can drive a double acting cylinder to lengthen and retract with no directional solenoid valve. It’s generally used in recre-ational vehicles, pleasure boats and transportable phases, and so forth.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic components concerned just before installation of the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities. N46 hydraulic oil is proposed.
four. The power unit shown is intended to be mounted horizontally.
5. Oil transforming is needed right after the preliminary a hundred operation hrs, afterwards when just about every 3000 hours.
6. Check the oil level while in the tank immediately after the original working of your power unit.