Materials Handling Electrical power UNIT 2
Common Description
This energy unit capabilities energy up gravity down circuit. Activate the commence solenoid to start the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the lowering velocity controlled from the pressure compensated flow handle valve. Items of this series could be widely utilized in the sector of logistic devices for instance fork lift, mini lift table, and so forth.
Special Notes
one. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic elements concerned before mounting the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which should also be clean and absolutely free of impurities, N46 hydraulic oil is proposed .
4. Oil altering is required immediately after the first a hundred operation hrs,afterwards after each and every 3000 hours.
5. The power unit must be mounted horizontally.

Material Dealing with Electrical power UNIT one
Basic Description
This power unit is made for the fork lift field, consisting of remarkably effective gear pump, DC motor, guide increase and reduced valve, tank, ect. The up and down motion are controlled through the lever with the guide release valve, that is outfitted with an electric switch to activate the motor. The lowing pace is managed from the strain compensated flow handle valve.
Special Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean the many hydraulic elements concerned ahead of installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities, N46 hydraulic oil is suggested .
4. Oil modifying is needed soon after the initial one hundred operation hrs, afterwards once each and every 3000 hours.
5. The electrical power unit shown is designed to be mounted horizontally.