Highest put on resistance available by sealing grease in between pins and bushings
The durability of chain is significantly improved due to the fact grease is sealed concerning the pins and bushings by O-rings. The O-ring chain is the most reliable model of your Greatest Life Chain Series with its superb wear resistance even in the problems or environments wherever chain servicing is challenging.
Recommended uses.
?Situations where frequent chain replacement is required due to wear stretch
?Conditions wherever lubrication throughout the services is extremely hard
?In an atmosphere with substantially soil, sand, dust, etc.
?Applications that demand strength larger than that of a sintered bushing roller chain
Other attributes
?Reducing noise. (The noise degree is 3 dB reduced compared to common roller chains.)
?Minimizing vibration with all the friction made by O-Ring. (The power loss because of the friction is nearly negligible, because the frictional force in between the pins and bushings is for usually from the applications.)
Collection of chains
The strength of an O-ring chain is almost the exact same as that of a typical roller chain. (Since the pins are longer than these of regular roller chain, the average rupture strength is slightly lower.)
For choosing an appropriate chain, refer to “Selection of Chains” .
When the service ambient temperature is larger than 80° C, unique heat resistant O-rings has to be utilized. In this instance, get in touch with us for additional facts.
Connecting hyperlinks and offset links
Two forms of connecting hyperlinks are available: clearance match and interference match. When higher strength or durability is required, use interference-fit connecting hyperlink. Only 2POJ is obtainable as the offset hyperlink for all sizes.
Sprockets
O-ring chain employs longer pins than a common roller chain. When using multiplex O-ring chain, the normal sprocket for multiplex chains can’t be employed.
Caution
O-ring chain just isn’t suggested in applications in which solvents or other substances may possibly assault “Nitric Rubber”. Specific materials O-rings may also be out there for these conditions: Please seek advice from us for specifics. Usually, “Nitric Rubber” is broken by contact with all the following chemical supplies.